|
|
Internet, ISO, MS Excel, E-Mail, SCADA, MS Word, ISO 9000, ISO 9004, PLC, MS Outlook
|
|
|
Engineering : Instrument Technician From November 2008 To December 2008
Duties
Connection, calibration and commissioning of instruments
Checking that all instruments are positioned according to the pipe and instrument drawings
Checking that all instruments are connected correctly and are not malfunctioning
Checking that all instruments are connected to the correct addresses on the PLC’s
Engineering : Workshop Manager From May 2007 To August 2008
Duties
Workshop Manager
(May 2007-August 2008)
Design of control circuits for Generators and, MCC wiring and synchronizing generating sets, repairs of faulty generators and fault finding on MCC?s
Supervision of production personnel (12 staff)
Electrical Foreman
(2005-2007)
Supervise wiring of MCC and generators on site
Installation and commissioning of MCC and Generator, repairs of faulty generators and fault finding on MCC
Electrician
(2002-2003)
Controlling wiring for standby generator set, panel wiring, on site installation and commissioning of MCC and generator sets
Configuring of generator
Control instruments
Manufacturing : Maintenance Electrician From February 2007 To April 2007
Duties
Perform check list tasks, general service of cranes and faulty finding on crane MCC
Wiring and commissioning of PLC’s
Manufacturing : Electrician From December 2002 To 2002
Duties
Plant installation, fault finding on MC?s PLC;s
Wiring for PLC’s and commissioning
Manufacturing : Shift Electrician From 2018-06 To 2020-05
Duties
Fault finding on PLC’s ,AC and DC Speed drives and MCC’s.General plant maintenance
Printing - Publishing : Electronics Technician From 2011-7 To 2018-04
Duties
Fault finding on PLC’s ,Speed drives and MCC’s.General plant maintenance and clearing of faults on bus coupler systems
Manufacturing : Electrician From 2009-3 To 2011-06
Duties
Fault finding on Siemens and Allen Bradley PLC`s speed drives AC & DC motors. General factory maintenance
Perform daily check lists
Valve knowledge
Types of valves
Control Valves
Isolating Valves
Pneumatic Valves
Solenoid Valves
Hydraulic Valves
Basic PLC / SCADA programming
Electronics : Maintenance Electrician From 2003 To 2005
Duties
General maintenance of plant and equipment,
Repairs and fault finding on machinery
Installation of new machinery,
Perform check list tasks
Manufacturing : Panel Wireman From 2001 To 2002
Duties
Wiring of switch gear, speed driver?s and PLC’s
On site installation and commissioning of MCC’s
Electronics : Panel Wire Man From 1999 To 2000
Duties
Wiring of electrical switch gear, on site installation and commissioning of MCC’s
Manufacturing : Electrician / Apprenticeship From 1991 To 1998
Duties
Electrician / Apprenticeship
1994 to 1998
General service of printing machines corrugated
Board maker and die cutting machinery
Installation and maintenance of new plants, fault finding on all machines, speed drives and PLC?s
Initial setup of speed drives and PLC?s
Repairs and fault finding on variable speed drives
To ensure product conformance to ISO 9002 Standards
Quality Controller
1991 to 1994
Laboratory tests on corrugated boards to ensure product conformance to ISO 9000
In- process inspector using sampling methods
|