Quality Manager (Steel Manufacturing, Galvanizing and Tubes manufacturer)

• Managing the subcontractors
• Conduct the Inspection of all C&I installations at the power station
• Compiling the Data pack and ensuring handover to Eskom GCD
• Verification of accurate recording of all ITP’s and inspections on installations.
• Ensuring correct installation according to specifications.
• Verification of compilation of date book records.
• Follow up on all deviations and non-conformance reports.
• Ensure sign off on relevant witness and hold points on ITP’s where applicable.

• Oversee implementation of quality assurance and quality control on site.
• Interface with subcontractor quality and construction personnel on quality issues.
• Interface with SPWR supplier quality team.
• Participate in MRB (Material Review Board) weekly meetings.
• Direct activities of Field Quality Auditor Direct activities of Site Quality Officers.
• Manage quality training of subcontractor personnel and auditors and support them with documentation and procedures.
• Collect data and maintain regular quality reports, i.e. metrics, paretos, corrective/preventive actions.
• Ensure all quality issues are reported through SunPower systems in a timely fashion.
• Ensure non-conforming materials are quarantined and tracked by subcontractor.
• Ensure that systems are in place and being used effectively for material receipt, inspection, acceptance, and traceability.
• Coordinate the collection of quality-related deliverables from subcontractors and SunPower construction personnel.
• Issue Supplier Corrective Action Requests (SCAR) as appropriate to address quality issues from construction subcontractors and track progress of SCARs.
• Lead 8D (8 Discipline) investigations of quality issues on site as appropriate.
• Maintain comprehensive records of quality issues on site.
• Communicate with all levels of construction team and management.
• Interface with construction personnel, subcontractors, supplier quality, and construction management.
• Support pro-active risk evaluation and mitigation

• Managing site quality, in civil, electrical and mechanical
• Managing the subcontractors quality of the construction
• Conducting site inspection

• Prompt notification of any non-conforming situations.
• Meeting of targets in regards to quality of work.
• Verification of accurate recording of all ITP’s and inspections on installations.
• Ensuring correct installation according to specifications.
• Verification of compilation of date book records.
• Follow up on all deviations and non-conformance reports.
• Ensure sign off on relevant witness and hold points on ITP’s where applicable.
• Conducting Monthly progress reports.

• Managing site quality, in civil, electrical and mechanical
• Managing the subcontractors quality of the construction
• Conducting Subcontractors audit
• Updating the weekly Project Matrix
• Reports to the Project Manager Construction
• Evaluate the quality of the QA program of the contractor
• Evaluate the follow-up of the inspection matrices by the contractors

• Managing site quality, in civil, electrical and mechanical
• Managing the subcontractors quality of the construction
• Conducting Subcontractors audit
• Updating the weekly Project Matrix
• Reports to the Project Manager Construction
• Evaluate the quality of the QA program of the contractor
• Evaluate the follow-up of the inspection matrices by the contractors
• Supplier development
• Supplier audits

• Developing the ISO 9001:2008 Main Procedures
• Implementation of the ISO 9001:2008
• Developing the QMS Manual
• Development of the work instructions
• Training of the workforce in ISO 9001:2008

• Manage the Quality Control Department.
• Manage customer complaint
• Manage the process engineers
• Manage and develop the Quality Managers network of the BU
• Set up internal specifications and the process (definition, update, validation with Sales / Marketing)
• Manage the new projects and development
• Manage the Laboratory

• To conduct internal audit on all Behr’s process and systems against the requirement of ISO 9001 - ISO 14001, ISO-TS 16949 and customer requirements.
• To administer the corrective action system.
• Supplier APQP
• Prepare audit schedules for process audits.
• Execute audit related activities effectively, i.e. audit conduct, and audit reporting, audit meetings.
• Adequately follow-up and monitor previous audit findings.
• Report on all audit findings adequately.
• Maintain accurate records of all audit activities.
• Conduct analysis on a monthly basis on the following: Internal audits, corrective action & deviation request.
• Process Improvement and problem solving
• Central audit function
• SAP Notification

• Manage the Quality Control Department.
• Responsible for problem solving, using statistical technique.
• Responsible for internal and external corrective action system.
• Responsible for the presentation of monthly report to Directors.
• Responsible for process improvement.
• To ensure that all our lines produce good quality.
• Responsible for the implementation of systems 
• Responsible for FMEA, PQP update.
• Responsible for ISIR approval for process release.
• Responsible for process capability studies.
• To ensure systems are followed, process and system audits are 
• conducted.
• Responsible for SPC application.
• System implementation co-ordination.

• Manage and coordinate daily product audits.
• Achievement of set objective with reference to ISO 9000, VDA 6.1 and ISO 1400
• Monitor and report on internal Quality Management system and implementation.
• Conduct supplier audits as per Management request.
• Responsible for the internal corrective action system including follow up reporting.
• Responsible for problem solving, using statistical technique.
• Supervising the Inspectors and Product Auditors.
• Responsible for FMEA, Control plans and Flow Charts.
• Customer liaison travel international and local

Quality  Auditor

24/01/2000 to 01/01/2002

• Supervising the inspectors
• Doing daily audit on finish products.
• Conducting process audits.
• Compile the daily inspection report.
• To stop production if quality is no to standard.
• Supply the daily feedback to Q.A Manager.

• Patrolling the assembly line.
• Measure the product to specification, using measuring equipment.
• Fill the inspection sheet and reporting any non-conformance.
• Patrol the Machine shop.
• Inspecting on an ex-ray for porosity.
• Inspecting the final products on paint shop.